Development machine specifications:
02. The direction of substrate conveying: right to left (right to the working surface)
03. Roller pitch: 70～80mm
04. Width of conveying room: 370mm
05. Working height: 900mm±25mm
06. Body structure:
Material: PVC (transparent board)
Thickness: 10～12t/mm.
07. Bucket structure:
Material quality: PVC (transparent board) 12t/mm
Maximum allowable operating temperature
08. Conveying roller: equipped with UPEψ35 guide wheel conveying.
Material quality: UPE
Specification: ψ12mm
09. Transmission gear: Helical gear 13T UPE (slave)/PVDF (master)
10. Drive shaft:
Material quality: SUS304
Specification: ψ16mm half moon type
11. Drive motor: brushless motor (Taiwan Taiwan)
12. Power source: 380V±10V, 50Hz, AC three-phase, 22KW
13. Exhaust volume: 30M3/MIN
The exhaust air is arranged on the upper side of the machine body, and the wire duct is arranged on the upper side of the rear side of the machine body.
14. Pure water consumption: 15L/MIN
15. Driven shaft:
Material quality: SUS304
Specification: Φ12MM
16. Conveying rollers: all conveying rollers are machined
Specification: Φ12×36MM
17. Circulation Tube: Anchor Plate
18. Whole machine control: man-machine interface and PLC control, with water saving, power saving, plate blocking alarm, counting functions, the tank is equipped with low liquid level shutdown protection function
19. Electrical components: famous brand products from Japan, France, Taiwan, etc.
20. Nozzle: PP plastic nozzle
21. Pump: Expo, Nanyuan Pump
22. Air pump: Taiwan product
23. Total inlet pipe specification: DG25 (outer diameter is Φ32MM)
24. Total drain pipe specification: DG80 (outer diameter is Φ90MM)
25. Exhaust pipe specification: DG150 (outer diameter is Φ160MM)